Application of industrial endoscopes in heavy industrial equipment

After long-term use of a heavy industrial equipment, the spindle system often breaks down. The spindle occasionally screams when processing parts. cause the device not to work normally. When there was abnormal noise in the initial stage of the equipment, the maintenance department inspected and repaired the equipment. The inspection found that the spindle rotation was abnormal after the equipment did not clamp the workpiece, and it was preliminarily judged that there was a problem with the vacuum fixture system of the equipment. However, because the equipment manufacturer requires the user not to disassemble the main shaft of the equipment by himself, it is impossible to see the specific situation inside the equipment failure point using conventional diagnostic methods, and it has not been possible to conduct a thorough inspection of the equipment failure, resulting in equipment failures that cannot be ruled out.

In order to understand this problem, many heavy industry units are equipped with fault diagnosis equipment-industrial endoscopes. The images collected by the top of the endoscopes are transmitted to the monitor and displayed. Without dismantling the equipment, it can Observing and judging the interior of the fault point greatly improves the identification rate and reliability of equipment faults. At the same time, the operation of troubleshooting is guided on the image of the endoscope, and the troubleshooting of equipment failures is successfully completed.

Heavy Industry Equipment
 
Through the use of industrial video endoscopes, the previous method of full dismantling and full repair is changed to targeted repairs, with clear directions, reduced workload, reduced labor intensity of workers, improved repair quality, and shortened cycle time. In the maintenance of some special equipment and components that cannot be disassembled, it can change the maintenance method that judged the failure based on experience in the past, and can provide direct and specific image data for maintenance, making the judgment of the failure more scientific and intuitive.

Industrial videoscope
Yipincheng is a manufacturer of industrial endoscopes, with a dedicated R&D team, constantly updating products, being loyal to customer needs, always oriented by customer needs, and producing endoscope products that meet customer needs. At present, the main advantages of Yipincheng industrial endoscopes are: small tube diameter, the minimum tube diameter can reach 2.8mm; replaceable tube diameter, one machine with multiple functions, fully meet the requirements of different environments and different equipment; million high-definition pixels, high-definition industrial The endoscope is always close to the clarity of the naked eye, helping to clearly locate the problem, so as to solve the problem; 360° arbitrary rotation, the bending degree can reach 160°, which is suitable for most curved pipes; after-sales guarantee service, there is after-sales service behind each product Service telephone, the company has a complete after-sales service system, the repair time of equipment damage is short, and the customer's time is not delayed.